)
)
)
)
In order: FP30, FP30 compared with
the FP Green, Comparison again, and size of FP30 vs my hand.
)
)
)
)
Fabrication of the 3.5"
downpipe, necking down to 3" for the turbine exit. This picture
makes the welding look much worse than what it is. Next in line are
photos of the DP wrapped, and the external dump pipe running out to the
back, where it dumps back into the exhaust.
)
)
)
Underneath the turbo (installed in
car). Notice how I ran the water lines.
){kind=link}