| This
turbo is a Hybrid created by Rob at ForcedPerformance. Its a mix of
a garret and a mitsubishi turbo, and is sized between a Frank3 and a
Frank4. It flows about 720cfm at 15psi and is rated for 450-500
engine hp. Its bigger than my previous 20g by flow numbers, but
externally it looks almost the same. Also coupled it with an 8cm
housing, fully ported by the one and only robert. It has a bit
more lag but is just as responsive. The turbo also does not use
coolant for cooling, only oil. And it comes with a 3" OD inlet,
50trimGarret wheel, Tdo6 exhaust wheel. |
| Click on
Picture for larger image (Will open in a new resized window): 
Green turbo, exhaust side, GreenVS20g
(smaller is the 20g)
 
Some install pics, had to block off the
coolant line from the block |
)
)
)
)
)
)
)
)
)
)