Listing of free DSM CD files

Tips: Try to use Internet Explorer to download the files, using
Netscape has caused some problems for people (the files are
treated as ASCII instead of BINARY, and doesn't unzip pro-
perly.) Also, when unzipping into a WINNT system, use the
most recent version of a "RAR" unpacker, try
http://rarsoft.com/

95-96 2g/3000gt keyless entry info (programming, etc)

keyless.pdf            03-Nov-99 22:46   187k
3s_doorlockcircuit.pdf            11-Nov-99 22:46   330k
3s_doorwiring.pdf            11-Nov-99 22:46   88k

Keyless programming for 97+ DSM's
To reprogram your keyless entry system for a new key fob:
1) Turn ignition to OFF.
2) Ground pin 1 of the Data Link Connector (black 16-pin connector under dash driver's side). Pin 4 of this connector is a ground, so placing a jumper wire between pins 1 & 4 will accomplish this. Grounding pin 1 tells the system you are getting ready to reprogram it.
3) Close all the doors.
4) Turn the key to ACC, then back to OFF. The power locks will lock/unlock. The system is now ready to be programmed.
5) Press a button on your key fob.
6) If you have two key fobs, press a button on the second fob within 1 minute of pressing a button on the first one. Both must be programmed at the same time. If you only have one remote, press a button on it 2 more times to signal that you only have one.
7) The doors will lock/unlock to signal that the codes were received.
8) Remove the connection between pins 1 & 4.
From: Bob H <hodge@one.net>

Various overhaul manuals.

6g72.pdf               01-Aug-99 14:32   4.3M
autotran.pdf           01-Aug-99 15:00   5.1M
mtinstall.pdf          03-Sep-99 08:58   601k